Watertight Wire Management

UL Cable Tight™ System

Watertight Wire Management

UL Cable Tight™ System

The CableTight™ wire management system provides a true watertight end-to-end solution for electrical, sensor, and data wire management. With the safe and easy electrofusion welding installation process, the HDPE-constructed electrical conduit, entry seals, and sumps are joined together to form one seamless system.

CableTight UL Highlight Intro.psd

WATERTIGHT WIRE MANAGEMENT SYSTEM

Protect and extend the life of vital petroleum system electrical and data wiring with the CableTight wire management system. 


Electrofusion Welding

The electrofusion welding installation process that has been used to create seamless, watertight connections for petroleum pipework systems for over 30 years is now available in a solution designed specifically for petroleum system electrical and data wiring.

Eliminate Potential Leak Paths

With continuous HDPE conduit runs of up to 1,500 feet, CableTIght™ eliminates buried conduit joints that have been traditionally made using threads, epoxy, or glue that can be susceptible to leaking.

Watertight Containment Entry

The CableTight™ System includes polyethylene coated and spigotted rigid metal conduits that are welded to HDPE entry boots, creating a watertight entry into either polyethylene or fiberglass containment sumps.

CableTight UL - Main - Wide.psd
ACCURATE INSTALLATION

Connections between conduit, containment sumps, and fittings are made using the electrofusion welding process.

CableTight UL - Install - Welder.psd

Electrofusion Welder

With the touch of a single button on the welder unit, coils embedded into each fitting are heated and then cooled to weld the individual components into one seamless, watertight connection.

CableTight UL - Install - Smart.psd

A Smart Welder

The welder calculates the exact settings needed regardless of conduit diameter, component, or ambient temperature.

 

CableTight UL - Install - Easy.psd

Easy for the Installer

This process yields consistent and accurate joints and eliminates any messy glues or adhesives that can be affected by weather or temperature.

 

CableTight UL - Flexible - Wide.psd
FLEXIBLE HDPE CONDUIT

CableTight™ flexible conduit is constructed of HDPE (high density polyethylene) and comes available in 1,000' or 1,500' coils that can be rolled out into long continuous runs, free of joints.

Long Runs

The long conduit runs help to eliminate potential liquid entry paths from threaded or glued buried joints that need to be made every 10' with traditional PVC or steel conduit.

Durable

The conduit’s flexible construction wont crack when bent during cold-weather installation or shatter if accidentally struck by a tool or stepped on after they’ve been laid out on a busy job site. 

Reels

CableTight™ flexible conduit comes pre-loaded on a compact reel allowing electrical contractors to quickly and easily pull long runs of conduit onsite.

CableTight UL - Trough - Wide.psd
RIGID METALLIC CONDUIT

For watertight end connections, the HDPE flexible conduit is electrofusion welded directly to bendable 6' sticks of rigid metal conduit that are either fully coated with PE or have a PE spigot connector depending on the application.

CableTight UL - Dispenser - Trough.psd

Dispenser Sumps

CableTight UL - Tank Sump - Trough.psd

Tank Sumps

CableTight UL - Metallic - Trough.psd

Electrical Trough

CableTight UL - Install - Wide.psd
WATERTIGHT CONTAINMENT ENTRIES

The HDPE elements of the CableTight™ System allow installers to make watertight entries into both polyethylene or fiberglass containment sumps.

CableTight UL - Watertight - Poly.psd

Polyethylene Sumps

For polyethylene sumps, CableTight polyethylene entry seals weld directly to the sump’s wall, creating a bond that’s even stronger than either of the two components on their own.

CableTight UL - Watertight - Fiberglass.psd

Fiberglass Sumps

For fiberglass sumps, CableTight fiberglass entry seals feature two rigid halves that compress into place on the sump wall, removing exposed rubber that can break down over time.

REAL ELECTRICIANS, REAL REACTIONS

We setup a demonstration course and invited veteran electrical contractors to compare the CableTight™ System with existing electrical conduit systems. Their combined experience includes hundreds of petroleum-specific electrical installations. See for yourself what these experts had to say.

Approvals/Certifications

  • Flexible conduit (HDPE): UL Certification of Compliance to UL651A, (HPDE conduit meets NEC 2017 Code Requirements, NFPA 70-2017 (Section No. 514.8 Underground Wiring).
  • Rigid metal conduits: UL Certificate of Compliance to UL6 & UL971.
  • Electrofusion fittings: UL Certificate of Compliance to UL971.

Components

  1. Flexible conduit (coils)
  2. 6' coated rigid metal conduit
  3. 6' spigotted rigid metal conduit
  4. Polyethylene sump entry seal
  5. Polyethylene sump entry seal reducer
  6. Fiberglass sump entry seal
  7. Reducing coupler
  8. Coupler
cabletight-ul-diagram2.psd

¾" Cable Tight™ Wire Management System

Part Number Description
000-075-1000-EC-U ¾" flexible conduit, 1,000' reel, pre-loaded on compact reel
000-075-1500-EC-U ¾" flexible conduit, 1,500' reel, pre-loaded on compact reel
  • Inside Ø 0.804" (20.4mm).
Part Number Description
000-075-06-ERMC-PE ¾" coated rigid metal conduit, 6' stick - 12 pack
  • Inside Ø 0.845" (21.5mm).
Part Number Description
000-075-06-ERMC ¾" spigotted Rigid Metal Conduit, 6' stick - 12 pack
91-027 NPT ¾" spigotted Rigid Metal Conduit, 8" stub
  • Inside Ø 0.845" (21.5mm).
Part Number Description
REB-C-0075 ¾" fiberglass entry seal, flat surface
REB-C-R-0075 ¾" fiberglass entry seal, round surface
Part Number Description
303-063 Polyethylene entry seal (used for both ¾" and 1" systems)
Part Number Description
49-063-031 ¾" polyethylene entry seal reducer
Part Number Description
49-031-027 ¾" reducing coupler
Part Number Description
02-027 ¾" coupler

1" Cable Tight™ Wire Management System

Part Number Description
000-100-1000-EC-U 1" flexible conduit, 1,000' reel, pre-loaded on compact reel
  • Inside Ø 1.029" (26.0mm).
Part Number Description
000-100-06-ERMC-PE 1" coated rigid metal conduit, 6' stick - 12 pack
  • Inside Ø 1.063" (27.0mm).
Part Number Description
000-100-06-ERMC 1" spigotted Rigid Metal Conduit, 6' stick - 12 pack
91-033 NPT 1" spigotted Rigid Metal Conduit, 8" stub
  • Inside Ø 1.063" (27.0mm).
Part Number Description
REB-C-0100 1" fiberglass entry seal, flat surface
REB-C-R-0100 1" fiberglass entry seal, round surface
Part Number Description
303-063 Polyethylene entry seal (used for both ¾" and 1" systems)
Part Number Description
49-063-038 1" polyethylene entry seal reducer
Part Number Description
49-038-033 1" reducing coupler
Part Number Description
02-033 1" coupler